Allied Plumbing Water Heaters

HH20

NEW CONCEPT OF HEATING WATER VERSUS STANDARD WATER HEATERS According to the Department of Energy tests, this water heater will heat 10 gallons of incoming 58° cold water to 115° hot water temperature per kilowatt of energy consumed at a rate of 48 to 55 gallons per hour, first hour rating.
	This is the most energy efficient water heater available today. 30% of your electric bill is consumed by heating water. By only heating the water you use and not having to re-heat the same water twice, the consumer should expect to see a 10 to 15% reduction in their electric bill. This should amount to hundreds of dollars per year saved.
A THERMO-CONDUCTIVE WATER HEATER A thermo-conductive water heater consists of a plastic tank of pre-heated water, in which a corrugated inside and finned outside copper coil is submerged. One end of the coil is connected to the cold water supply. The other end is connected to the hot water outlet. Water enters the thermo-conductive coil as cold and is heated as it circulates through the coil and exits as hot water. This process allows you to heat only the water you use.	Saves you money Fastest recovery No pressure— will not blow up More hot water
Only one pop-out element- easy to repair Long lasting element- no sediment to build up on the element Recyclable Environmentally safe	ANY STANDARD 50 GALLON WATER HEATER A standard water heater consists of a storage tank of pre-heated water. As hot water is drawn, cold water enters the tank and cools the pre-heated water. Therefore, it must heat the same tank of water twice before the consumer can use it. Very inefficient.

Only one pop-out element- easy to repair

Long lasting element- no sediment to build up on the element

Recyclable

Environmentally safe

VERY EFFICIENT
VERY INEFFICIENT

Saves money-average yearly cost as low as $197.00
Safer- not under pressure-will not blow up
Cleaner- no sediment buildup
Inner and outer plastic tanks-2½ insulation-will not rust
Faster recovery time is 37gph
Pop-out element-replaceable without draining tank
Only one element
Only one easy accessible thermostat
Longer lasting element-no sediment buildup
Corrugated, finned copper tubing delivers clean hot water
Plastic double wall tanks-outer tank protects from possible leaking inner tank
Plastic tank-resistant to heat, cold and electricity

Average yearly cost up to $429.00

Under pressure may blow up

Sediment buildup
Metal tank-will rust

Recovery time is 17 to 25gph
Tank must be drained to replace elements
Two element
Two thermostats

Sediment buildup shortens life of element
Sediment in tank pollutes hot water supply
One metal tank-no protection from leaking tank
Metal tank-conducts electricity heat & cold

(ENERGY EFFICIENT)

(VERY INEFFICIENT)

TODAY'S MOST ENERGY

EFFICIENT WATER HEATER

Thermo-conductive corrugated, finned copper coil heats the water as it passes through the coil
Energy efficient
Plastic tank-long life-will not rust
Clean-sediment free water
One thermostat-easy repair
All repairs from top of tank-without draining the tank
Plastic-will not conduct electricity
10 year limited warranty

We Also Provide Professional Installation.

Serving Tulsa Since 1947.

Please Call The Store At

918-587-1000

Allied Plumbing